Wish List

Ultralight C-15-RBL-HB extra long triple 15MM rod clamp with BA-HB ball adapter. The C-15-RBL-HB was designed for 15MM cinema camera rod/rail systems and comes with a BA-HB ball adapter. The dual 15mm holes are spaced 60mm apart, it is 5 7/8" in length and 3/4" square with ten 1/4" -20 threaded holes and a large black plastic knob. They are black in color, made out of 6061 T6 aircraft-grade aluminum with Type Il anodizing and the 1/4"-20 x 1" knob bolt and 1/4"-20 x 1 1/2" BA-HB bolt are 316 stainless steel.

Ultralight DB-03 double ball rod arm. The DB-03 is a double ball rod arm. It is 3" from O-ring to O-ring or 4" total length with a 3/8" diameter rod. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight DB-05 double standard ball arm. The DB-05 is the original standard double ball arm design that Ultralight is known for. It is 5" from O-ring to O-ring or 6" total length. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight DB-06 double ball rod arm. The DB-06 is a double ball rod arm. It is 6" from O-ring to O-ring or 9" total length with a 3/8" diameter rod. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight DB-08 double ball standard arm. The DB-08 is the original standard double ball arm that Ultralight is known for. It is 8" from O-ring to O-ring or 9" total length. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight DB-09 double ball rod arm. The DB-09 is a double ball rod arm. It is 9" from O-ring to O-ring or 10" total length with a 3/8" diameter rod. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight DB-12 double ball standard arm. The DB-12 is the original standard double ball arm that Ultralight is known for. It is 12" from O-ring to O-ring or 13" total length. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight DB-16 double ball standard arm. The DB-16 is the original standard double ball arm that Ultralight is known for. It is 16" from O-ring to O-ring or 17" total length. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight DB-CB10 double ball crossbar arm. The DB-CB10 is a double ball crossbar arm. It is 10" from O-ring to O-ring or 11" total length. The ball at each end is our BA-TT and each has a 1/4" hole. The flat bar is 4 1/2" long, has six 1/4" threaded holes and the center has one 1/4" hole. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III and the hardware is 316 stainless steel.

Ultralight DB-EXT double ball adjustable arm. The DB-EXT is a double ball adjustable arm. It adjusts from 12 1/2" to 19" measured from O-ring to O-ring or 13 1/2" to 20" for total length. The ball at each end is our BA-TT mounted to two flat bars with a long 1/4" slot. Each flat bar has one 1/4" threaded hole and each ball end has one 1/4" hole. There is a large round plastic knob that can be tightened or loosened for easy adjustment. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III and the hardware is 316 stainless steel.

Ultralight GP-TRI-MOUNT GoPro mount. The GP-TRI-MOUNT is tripod mount designed to hold a GoPro. It is plastic with 1/4" mounting hole in the bottom. The hardware included is 316 stainless steel. The bolt that holds the GoPro in places is not included

Ultralight LL-BA quick release base for the LL-BS. The LL-BA was designed to slide onto our BA-TP base plate and the ends to some IKelite trays. It was also made so the LL-BS could be attached to it allowing 3/4" Locline to be used. It is 1 1/2" diameter, 1" tall and has a 1/4" threaded mounting hole on top. Comes with a 1/4"-20 x 1/2" thumb screw and 1/4"-20 x 3/4" philip screw. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and included hardware is 316 stainless steel.

Ultralight LL-BS bolt on base with 3/4" Locline. The LL-BS was designed to bolt to our LL-BA or any other part that a 3/4" locline would be needed. It is 1 1/2" diameter, 1" tall and has a 1/4" threaded mounting hole on top. It can be bolted to most anything using either the 1/4"-20 x 7/8" or 1/4"-20 x 1 1/4" allen bolts and the two flat washers, one split washer and one 1/4" nut that are included. Also included is an attached section of 3/4" Locline. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and included hardware is 316 stainless steel.

Ultralight LL-YS YS style light and strobe mount with 1/2" Locline. The LL-YS was designed to hold a YS style light or small strobe using a 5/16" hole. The LL-YS comes with a section of 1/2" Locline attached to it. To attach it to a 3/4" section of Locline an adapter like our LL-AD would be needed to go from 1/2" to 3/4". It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight LL-AD Locline adapter from 1/2" to 3/4". The LL-AD is a adapter used to go from 1/2" to 3/4" Locline. It is black plastic, easy to use and can be snapped on or off when needed.

Ultralight SB-04-BCK long ball mount kit for twin buoyancy arms. The SB-04-BCK is the SB-04 ball mount that comes with two plastic washers. It is designed to attach to the AC-CSLSK2 or the AC-CSKXLSK2 clamps so two large buoyancy arms can be mounted side-by-side over a camera. It is black in color, 4" in length, has a ball mount on one end and a 1/8" thick flat end with a 1/4" hole on the other end. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing. Two 1/2 x 1/4 x 1/8 plastic washers are supplied with the kit.

Ultralight SB-04 long ball mount. The SB-04 was designed as a universal ball mount that can be bolted between a handle and ball or used to attach to something to be used as an additional ball mount. It is also part of the SB-04-BCK kit. It is black in color, 4" in length, has a ball mount on one end and a 1/8" thick flat end with a 1/4" hole on the other end. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight SB-11 single ball flat arm. The SB-11 was designed to be an adjustable universal arm with a ball at one end especially because of the 7" long 1/4" slot. The flat arm is part of our adjustable tripod arms with a BA-TT ball mount attached to one end. Total length is 11" and it has one 1/4" threaded hole at the non-ball end. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.