Wish List

Ultralight BA-HB6 Inon strobe ball adapter. The BA-HB6 was designed to fit the Inon strobes. It is our BA-HB ball mount is 1 1/2" tall with a 5/8" base with 6mm x 40mm allen head bolt. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the bolt is 316 stainless steel.

Ultralight BA-IK quick release ball adapter for Ikelite handles. The BA-IK was designed to fit the quick release on Ikelite handles. The ball adapter is 2" tall when placed into handle and made out of 6061 T6 aircraft-grade aluminum.

Ultralight BA-IKT4 quick release adapter for IKELITE handles with four ball adapter mounting holes. The BA-IKT4 was designed to fit the quick release adapter for IKELITE handles. It has four 1/4"-20 threaded holes around the base below the ball so other ball adapters can be added. The ball adapter is 3 1/2" tall when placed into handle. It is made out of 6061 T6 aircraft-grade aluminum and black in color.

Ultralight BA-PAN ball adapter for Panavision cameras. The BA-PAN was designed for Panavision cameras with a 16MM hole to place a ball adapter. The diameter of the BA-PAN is the same as a 5/8" baby pin and will slide into any baby pin adapter such as our BA-SPUD. It is black and made out of 6061 T6 aircraft-grade aluminum with Type IIl anodizing.

Ultralight BA-MT universal angled ball adapter. The BA-MT was designed to have many uses due to the angle of the mount and the mounting plate. It is used to attach arms/legs to our TRI-TRAY and it can be used as a ball mount using one or both mounting holes. It is black in color, made out of 6061 T6 aircraft-grade aluminum with Type IIl anodizing and the included hardware is 316 stainless steel.

Ultralight BA-PAN15 ball adapter for 15MM cinema rod clamps
. The BA-PAN15 was designed to work with 15mm cinema rod clamps and rail systems. It is black and made out of 6061 T6 aircraft-grade aluminum with Type IIl anodizing.

Ultralight BA-SA angled ball adapter for Subal housings. The BA-SA is an angled base adapter that was designed to bolt on a Subal housings. It is black in color, made out of 6061 T6 aircraft-grade aluminum with Type IIl anodizing and the included hardware is 316 stainless steel.

Ultralight BA-SP plate for Subal housing to mount a AD-6MM. The BA-SP is a small square base plate designed to bolt on a Subal housings so a AD-6MM ball adapter could be added. It has two mounting holes and one 6MM threaded hole and is black in color. Made out of 6061 T6 aircraft-grade aluminum with Type IIl anodizing and the included hardware is 316 stainless steel.

Ultralight BA-SPUD ball adapter that fits C-stands and 5/8" baby pins. The BA-SPUD was designed to fit C-stands and cinema 5/8" baby pins so a ball adapter could easily be added. It will slide over the top of either and has a 1/4"-20 bolt and large round knob to twist and tighen in place. It is 3 1/4" tall and black in color. Made out of 6061 T6 aircraft-grade aluminum with Type IIl anodizing and the included hardware is 316 stainless steel.

Ultralight C-15-RBL extra long triple 15MM rod clamp. The C-15-RBL was designed for 15MM cinema camera rod/rail systems. The three 15mm holes are spaced at 60mm and 100mm apart, it is 7 1/2" in length and 3/4" square with ten 1/4" -20 threaded holes and a large black plastic knob. They are black in color, made out of 6061 T6 aircraft-grade aluminum with Type Il anodizing and the 1/4"-20 x 1" knob bolt is 316 stainless steel.

Ultralight BA-SU dovetail base plate for Subal housings that fits the BA-AD and BA-DT ball adapters. The BA-SU is a dovetail base plate designed to bolt on a Subal housings so a BA-AD or BA-DT ball adapter could be added. It has two mounting holes and is black in color. Made out of 6061 T6 aircraft-grade aluminum with Type IIl anodizing and the included hardware is 316 stainless steel.

Ultralight BA-TG angled ball adapter that fits the BA-TP base plate. The BA-TG was designed to fit our BA-TP base plate which can be attached to Nauticam, Sea & Sea and Aquatica housing handles. By the use of a 1/4"-20 x 1 1/4" thumb screw it can easily slide onto or off the BA-TP plate under or above the water. The length and angle of the adapter makes it a great choice . It is black in color, made out of 6061 T6 aircraft-grade aluminum with Type IIl anodizing and the included hardware is 316 stainless steel.

Ultralight BA-TP base plate for the BA-TG and fits Nauticam, Sea & Sea and Aquatica housing handles. The BA-TP was designed to fit be bolted to Nauticam, Sea & Sea and Aquatica housing handles so our BA-TG angled ball adapter could be used. It has two mounting holes that are 1" to 1 1/4" apart and black in color. Made out of 6061 T6 aircraft-grade aluminum with Type IIl anodizing and the included hardware is 316 stainless steel.

Ultralight BA-TT ball adapter. The BA-TT was designed to be used on our TRI-TRAY to attach arms/legs to make a tripod. It is also the same ball mount on the ends of our DB-CB10 crossbar arm. It is black in color, made out of 6061 T6 aircraft-grade aluminum with Type IIl anodizing and the included hardware is 316 stainless steel.

Ultralight BA-W2 purple Wedgie 2 ball adapter. The BA-W2 was designed to fit the Wedgie 2 quick release base mount, it is 2" tall and purple in color. It is made out of 6061 T6 aircraft-grade aluminum with Type II anodizing.

Ultralight BA-W2-BK black Wedgie 2 ball adapter. The BA-W2-BK was designed to fit the Wedgie 2 quick release base mount, it is 2" tall and black in color. It is made out of 6061 T6 aircraft-grade aluminum with Type II anodizing.

Ultralight C-15-RB dual 15MM rod clamp. The C-15-RB was designed for 15MM cinema camera rod/rail systems. The dual 15mm holes are spaced 60mm apart, it is 5 7/8" in length and 3/4" square with ten 1/4" -20 threaded holes and a large black plastic knob. They are black in color, made out of 6061 T6 aircraft-grade aluminum with Type Il anodizing and the 1/4"-20 x 1" knob bolt is 316 stainless steel.

Ultralight C-15-RB-HB dual 15MM rod clamp with BA-HB ball mount. The C-15-RB-HB was designed for 15MM cinema camera rod/rail systems and comes with a BA-HB ball adapter. The dual 15mm holes are spaced 60mm apart, it is 5 7/8" in length and 3/4" square with ten 1/4" -20 threaded holes and a large black plastic knob. They are black in color, made out of 6061 T6 aircraft-grade aluminum with Type Il anodizing and the 1/4"-20 x 1" knob bolt and 1/4"-20 x 1 1/2" BA-HB bolt are 316 stainless steel.