Wish List

Ultralight AD-HS hotshoe ball adapter. The AD-HS was designed as a ball adapter that can be mounted to a cold shoe camera mount so something like a focus light could be add using a clamp. It is made using our BA-HS ball mount, aluminum square bottom plate, thumb screw and angled holding plate. Also comes with a small safety lanyard. Made out of 6061 T6 aircraft-grade aluminum with Type III anodizing, 316 stainless steel angled holding plate and plastic thumb screw.

Ultralight AD-HS-GP GoPro hotshoe mount. The AD-HS-GP was designed to mount a GoPro above a camera using the cold shoe camera mount. It uses the same mounting hardware as our AD-HS but instead of a ball adapter it has the GoPro tripod mount attached. Also comes with a small safety lanyard. Made out of 6061 T6 aircraft-grade aluminum with Type III anodizing, 316 stainless steel plate and a plastic thumb screw and tripod mount.

Ultralight AD-HSS stainless steel hotshoe ball adapter. The AD-HSS is the same as our AD-HS but designed with a stainless steel square mounting plate. It is made using our BA-HS ball mount, stainless square bottom plate, thumb screw and angled holding plate. Also comes with a small safety lanyard. Made out of 6061 T6 aircraft-grade aluminum with Type III anodizing, 316 stainless steel bottom plate and angled holding plate and plastic thumb screw.

Ultralight AD-HS-YS YS style hotshoe adapter. The AD-HS-YS was designed to mount a light or small strobe above a camera using the cold shoe camera mount. It uses the same mounting hardware as our AD-HS but instead of a ball adapter it has a YS style mount attached. Also comes with a small safety lanyard. Made out of 6061 T6 aircraft-grade aluminum with Type III anodizing, 316 stainless steel plate and a plastic thumb screw.

Ultralight AD-YS YS style hotshoe adapter with 1/4" threads. The AD-YS was designed as a universal YS style mount for a light or small strobe. It has 1/4"-20 female threads so it can be bolted to something. Made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight AD-IN Inon angled strobe ball adapter. The AD-IN was designed to fit the Inon strobes. It has a 45 degree angle and can be mounted in various positions using the included thumb screw and thick washer. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing, the bolt is 316 stainless steel and the thumb screw and washer are plastic.

Ultralight AD-MOD ball mount for older L & M video lights. The AD-MOD was designed to fit older Light & Motion video lights. It is similar to our BA-HB but made for a smaller center bolt. It is 1 1/2" tall with a 5/8" base and can be attached using the included 10/32" x 1 1/2" SHCS and washers. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the bolt and washers are 316 stainless steel.

Ultralight AD-NANO universal ball adapter with thumb knob. The AD-NANO was designed as a universal ball adapter that could be used in a number of Ultralight products and applications. It uses our black AD-1420 that is 2 1/2" tall, has a 1" base, 1/4"-20 female threads and comes with a 1/4"-20 x 3/4" SHCS with black thumb knob attached. It is made out of 6061 T6 aircraft-grade aluminum, Type III anodizing, 316 stainless steel hardware and plastic knob.

Ultralight AD-SK ball mount for L & M sidekick video lights. The AD-SK was designed to fit older Light & Motion video lights. It is similar to our AD-MOD that ia 1 1/2" tall with a 5/8" base but uses a different center bolt. It can be attached using the included 5MM x 35MM SHCS and washers. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the bolt and washers are 316 stainless steel.

Ultralight AD-SOLA ball mount for L & M Sola lights. The AD-SOLA was designed to fit the Light & Motion SOLA video lights. It is our BA-HB that is 1 1/2" tall with a 5/8" base with an added flat washer. It attaches to the L & M universal 1/4"-20 adapter using the included 1/4"-20 x 1 1/2" SHCS and washers. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the bolt and washers are 316 stainless steel. WARNING-The AD-SOLA will not bolt directly to the light. It will only bolt to the L & M universal 1/4-20 adapter that bolts to the light itself.

Ultralight AD-SS YS style short ball mount. The AD-SS was designed to fit any YS style light or strobe like the Sea & Sea strobes. It is black in color, 2 3/4" in length, has a ball on one end and the YS mount on the other with a 3/8" hole. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight AD-SSL YS style long ball mount. The AD-SSL is the same as our AD-SS but longer and designed to fit any YS style light or strobe like the Sea & Sea strobes. It is black in color, 4" in length, has a ball on one end and the YS mount on the other with a 3/8" hole. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight BA-19 ball mount to fit ARRI cameras. The BA-19 was designed to fit into the 19mm hole on ARRI cameras. It is our BA-HB attached to a 19mm x 62mm rod. It is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and 316 stainless steel bolt and washer.

Ultralight BA-AD angled ball adapter that fits the BA-DB dovetail plate. The BA-AD is a angled ball adapter and was designed to fit into our BA-DB universal dovetail plate. Once in place it is secured by a thumb screw and 1/4"-20 x 1" bolt. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing, the bolt is 316 stainless steel and the thumb screw is plastic.

Ultralight BA-AQN narrow universal base mount. The BA-AQN is a ball adapter with a narrow mounting plate designed to fit onto the Nauticam, Sea & Sea and Aquatica housing handles and also works well as a universal ball. It is 2" tall and has two mounting holes spaced 1" to 1 1/4" apart. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and all included hardware is 316 stainless steel.

Ultralight BA-AQW wide universal base mount. The BA-AQW is a ball adapter with a wide mounting plate designed to fit onto the Nauticam, Sea & Sea and Aquatica housing handles but also works well as a universal ball mount. It is 2" tall and has two mounting holes spaced 1" to 1 1/4" apart. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and all included hardware is 316 stainless steel.

Ultralight BA-ARRI-1/4 ball adapter with removeable locating pins. The BA-ARRI-1/4 was designed to fit the new 1/4" ARRI anti-twist locating pin holes by the use of two 1.6 x 3MM removable screws that serve as locating pins. If one of the removable screws is removed the BA-ARRI-1/4 will fit the SmallHD monitor. It is 2 1/2" tall and can be tightened into place by the use of an internal captured 3/8"-16 allen bolt. It is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and 316 stainless steel hardware. A 5/32 and 1.5 MM allen key are included.

Ultralight BA-ARRI-3/8 ball adapter with removeable locating pins. The BA-ARRI-3/8 was designed to fit the 3/8" ARRI anti-twist locating pin holes by the use of two 1.6 x 3MM removable screws that serve as locating pins. It is 2 1/2" tall and can be tightened into place by the use of an internal captured 3/8"-16 allen bolt. It is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and 316 stainless steel hardware. A 7/32 and 1.5 MM allen key are included.