Wish List

Ultralight TR-LB universal light duty L bracket. The TR-LB is a light duty universal "L" shaped mounting bracket that has many uses. It is 2 3/4" x 3 3/4". The shorter side has three 1/4" threaded holes and the longer side has a 1 1/4" long 1/4" wide slot. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight TR-HB universal heavy duty L bracket. The TR-HB is a heavy duty universal "L" shaped mounting bracket that was designed as support brackets for our TR-SLDK camera sled kit but still has many other uses. It is a 3" x 4" angled aluminum. The shorter side has three 1/4" threaded holes and the longer side has two 1 1/2" long 1/4" wide slots. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight TR-MB monitor bracket that fits the TRI-TRAY. The TR-MB was designed to be attached to a TRI-TRAY to hold a monitor and is part of the TR-MBK monitor package. It is 11" long, 1" wide and 1/4" thick with a 4" long 1/4" slot, four 1/4" threaded holes and two 1/4" holes. Hardware included is two 1/4"-20 x 5/8" allen bolts, two flat washers and two split washers. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the hardware is 316 stainless steel.

Ultralight TR-SBLD large single handle camera tray. The TR-SBLD was designed as a double handle camera tray for large sized camera housings. Made to use with camera housings with two or three 1/4" mounting holes. The tray is 14 3/8" long, 1 1/4" wide and 3/8" thick. It has two 3" long 1/4" slots, two 3 1/2" long 3/8" slots, two 2 3/8" long 3/8" slots, ten 1/4" threaded holes and one center 1/4 hole. Our AC-H handle is best used with the TR-SBLD. Included is the mounting hardware consisting of two 1/4"-20 x 3/4" bolts with thumb knob, two 6mm x 35mm bolts with thumb knobs and two 1/8" plastic washers. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel.

Ultralight TSTICK pointer stick with lanyard. The TSTICK is designed to be used as a pointer stick or stabilizer stick to stay off the bottom while taking pictures. It is a 16" x 1/4" rod with a 4 1/4" x 1/2" handle. At one end of the handle is a 1/4"-20 threaded hole so a BA-HB ball adapter (not included) can be mounted to it. Once the ball adapter is attached a GoPro or small light can be used with the use of a clamp. On the other side of the handle is a 8" blue wrist lanyard. It's black in color and made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight AC-CB-2pk short coarse thread clamp bolts. The AC-CB-2pk is a pack of 2 replacement bolts for our AC-CS, AC-CSF, AC-TCS, AC-CSSK, AC-TCSJK clamps. They are 1/4"-20 x 2 1/4" and made of 316 stainless.

Ultralight AC-CB28-2pk short fine thread clamp bolts. The AC-CB28-2pk is a pack of two replacement bolts for AC-CSF-28 clamps. They are 1/4"-28 x 2" and made of 316 stainless.

Ultralight AC-CBL-2pk long coarse thread clamp bolts. The AC-CBL-2pk is a pack of 2 replacement bolts for AC-CSB, AC-CSL, AC-CSLXL clamps. They are 1/4"-20 x 2 1/2" and made of 316 stainless.

Ultralight AC-SPR-5pk clamp springs. The AC-SPR-5pk is a pack of 5 springs that fit any Ultralight clamp. They are made of 316 stainless steel

Ultralight AC-WASH-1/8-10pk plastic clamp washers. The AC-WASH-1/8-10pk is a pack of 10 replacement plastic washers. They are used on all Ultralight clamps and many of our trays and other products. They are a 1/8" thick, 1/4" inside diameter and 1/2" outside diameter plastic washer.

Ultralight AC-WASH-1/4-5pk plastic clamp washers. The AC-WASH-1/4-5pk is a pack of 5 replacement plastic washers. They are used on some Ultralight trays, AC-TB bolts and and other products. They are a 1/4" thick, 1/4" inside diameter and 1/2" outside diameter plastic washer.

Ultralight AC-WASH-9/16-5pk plastic Inon strobe washers. The AC-WASH-9/16-5pk is a pack of 5 replacement plastic washers. They are used on the Ultralight AD-IN strobe adapter and BT-IN bolt. They are a 9/16" thick, 1/4" inside diameter and 1/2" outside diameter plastic washer.

Ultralight O-RING-BALL-25pk ball O-rings for arms and ball adapters. The O-RING-BALL 25pk is a pack of 25 replacement rubber O-rings. They are used on all Ultralight arms and ball adapters. The ball O-rings are Buna, Size 209N70

Ultralight O-RING-BALL-12pk ball O-rings for arms and ball adapters. The O-RING-BALL 12pk is a pack of 12 replacement rubber O-rings. They are used on all Ultralight arms and ball adapters. The ball O-rings are Buna, Size 209N70

Ultralight O-RING-BASE-25pk ball O-rings for the AD-1420 and AD-3816 ball adapters. The O-RING-BASE-25pk is a pack of 25 replacement rubber O-rings. They are used on the bottom of many Ultralight base adapters such as the AD-6MM, AD8MM, AD-1420 and AD3816 adapters. The base O-rings are Buna, Size 113N70

Ultralight O-RING-BASE-12pk ball O-ringsfor the AD-1420 and AD-3816 ball adapters. The O-RING-BASE-12pk is a pack of 12 replacement rubber O-rings. They are used on the bottom of many Ultralight base adapters such as the AD-6MM, AD8MM, AD-1420 and AD3816 adapters. The base O-rings are Buna, Size 113N70

Ultralight BT-SBLDUS-2pk imperial bolts for TR-SBLD trays. The BT-SBLDM-2pk is a pack of 2 replacement bolts with thumb knob for our TR-SBLD trays. The bolts are 316 stainless steel, 1/4"-20 x 3/4" with plastic thumb knob pressed onto them and come with a 1/8" plastic washer.

Ultralight BT-SBLDM-2pk metric bolts for TR-SBLD trays. The BT-SBLDM-2pk is a pack of 2 replacement bolts with thumb knob for our TR-SBLD trays. The bolts are 316 stainless steel, 6MM x 20MM with plastic thumb knob pressed onto them and come with a 1/8" plastic washer.