Wish List

Ultralight AD-NANO universal ball adapter with thumb knob. The AD-NANO was designed as a universal ball adapter that could be used in a number of Ultralight products and applications. It uses our black AD-1420 that is 2 1/2" tall, has a 1" base, 1/4"-20 female threads and comes with a 1/4"-20 x 3/4" SHCS with black thumb knob attached. It is made out of 6061 T6 aircraft-grade aluminum, Type III anodizing, 316 stainless steel hardware and plastic knob.

Ultralight AD-SK ball mount for L & M sidekick video lights. The AD-SK was designed to fit older Light & Motion video lights. It is similar to our AD-MOD that ia 1 1/2" tall with a 5/8" base but uses a different center bolt. It can be attached using the included 5MM x 35MM SHCS and washers. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the bolt and washers are 316 stainless steel.

Ultralight AD-SOLA ball mount for L & M Sola lights. The AD-SOLA was designed to fit the Light & Motion SOLA video lights. It is our BA-HB that is 1 1/2" tall with a 5/8" base with an added flat washer. It attaches to the L & M universal 1/4"-20 adapter using the included 1/4"-20 x 1 1/2" SHCS and washers. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the bolt and washers are 316 stainless steel. WARNING-The AD-SOLA will not bolt directly to the light. It will only bolt to the L & M universal 1/4-20 adapter that bolts to the light itself.

Ultralight AD-SS YS style short ball mount. The AD-SS was designed to fit any YS style light or strobe like the Sea & Sea strobes. It is black in color, 2 3/4" in length, has a ball on one end and the YS mount on the other with a 3/8" hole. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight AD-SSL YS style long ball mount. The AD-SSL is the same as our AD-SS but longer and designed to fit any YS style light or strobe like the Sea & Sea strobes. It is black in color, 4" in length, has a ball on one end and the YS mount on the other with a 3/8" hole. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing.

Ultralight BA-19 ball mount to fit ARRI cameras. The BA-19 was designed to fit into the 19mm hole on ARRI cameras. It is our BA-HB attached to a 19mm x 62mm rod. It is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and 316 stainless steel bolt and washer.

Ultralight BA-AD angled ball adapter that fits the BA-DB dovetail plate. The BA-AD is a angled ball adapter and was designed to fit into our BA-DB universal dovetail plate. Once in place it is secured by a thumb screw and 1/4"-20 x 1" bolt. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing, the bolt is 316 stainless steel and the thumb screw is plastic.

Ultralight BA-AQN narrow universal base mount. The BA-AQN is a ball adapter with a narrow mounting plate designed to fit onto the Nauticam, Sea & Sea and Aquatica housing handles and also works well as a universal ball. It is 2" tall and has two mounting holes spaced 1" to 1 1/4" apart. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and all included hardware is 316 stainless steel.

Ultralight BA-AQW wide universal base mount. The BA-AQW is a ball adapter with a wide mounting plate designed to fit onto the Nauticam, Sea & Sea and Aquatica housing handles but also works well as a universal ball mount. It is 2" tall and has two mounting holes spaced 1" to 1 1/4" apart. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and all included hardware is 316 stainless steel.

Ultralight BA-ARRI-1/4 ball adapter with removeable locating pins. The BA-ARRI-1/4 was designed to fit the new 1/4" ARRI anti-twist locating pin holes by the use of two 1.6 x 3MM removable screws that serve as locating pins. If one of the removable screws is removed the BA-ARRI-1/4 will fit the SmallHD monitor. It is 2 1/2" tall and can be tightened into place by the use of an internal captured 3/8"-16 allen bolt. It is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and 316 stainless steel hardware. A 5/32 and 1.5 MM allen key are included.

Ultralight BA-ARRI-3/8 ball adapter with removeable locating pins. The BA-ARRI-3/8 was designed to fit the 3/8" ARRI anti-twist locating pin holes by the use of two 1.6 x 3MM removable screws that serve as locating pins. It is 2 1/2" tall and can be tightened into place by the use of an internal captured 3/8"-16 allen bolt. It is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and 316 stainless steel hardware. A 7/32 and 1.5 MM allen key are included.

Ultralight BA-ARRI-SM side mounted ball with ARRI locating pins. The BA-ARRI-SM is a modified AD-SS ball adapter. It was designed with ARRI camera anti-twist locating pins and a large 3/8"-16 thumb screw. It is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and 316 stainless steel bolt and plstic thumb screw.

Ultralight BA-CL red Cinelock 16x9 ball adapter. The BA-CL was designed to fit the Cinelock 16x9 quick release base mount, it is 2" tall and red in color. It is made out of 6061 T6 aircraft-grade aluminum with Type II anodizing.

Ultralight BA-CL-BL blue Cinelock 16x9 ball adapter. The BA-CL-BL was designed to fit the Cinelock 16x9 quick release base mount, it is 2" tall and blue in color. It is made out of 6061 T6 aircraft-grade aluminum with Type II anodizing.

Ultralight BA-CL-BK black Cinelock 16x9 ball adapter. The BA-CL-BK was designed to fit the Cinelock 16x9 quick release base mount, it is 2" tall and black in color. It is made out of 6061 T6 aircraft-grade aluminum with Type II anodizing.

Ultralight BA-DB universal dovetail base plate. The BA-DB was designed to fit Nauticam, Sea & Sea and Aquatica camera housing handles but because of It's universal design it can be used for other purposes. It has two mounting holes that are 1' to 1 1/4" apart. The dovetail plate is made to fit our BA-AD and BA-DT ball adapters. It's made out of 6061 T6 aircraft-grade aluminum with Type III anodizing, the the included hardware is 316 stainless steel.

Ultralight BA-DB-ARRI dovetail base plate with ARRI anti-twist locating pins. The BA-DB-ARRI was designed from our BA-DB dovetail plate but made with ARRI anti-twist locating pins and one mounting hole that uses a 3/8"-16 x 1/2" allen head bolt. The dovetail plate is made to fit our BA-AD and BA-DT ball adapters. This is a great option to other cinema style ARRI quick disconnects such as the Cinelock 16x9 and Kondor Blue because when the ball mount is tightened into place it wedges the two parts against each other making it super solid. It's black in color, made out of 6061 T6 aircraft-grade aluminum with Type III anodizing and the included hardware is 316 stainless steel. Included is a 3/16" allen key.

Ultralight BA-DT black ball adapter that fits the BA-DB dovetail plate. The BA-DT was designed to fit our BA-DB dovetail base plate. It is a 2" tall ball adapter with a 1/4"-20 x 1" thumb screw. Once in place it is secured by a thumb screw and 1/4"-20 x 1" bolt. The ball adapter is made out of 6061 T6 aircraft-grade aluminum with Type III anodizing, the bolt is 316 stainless steel and the thumb screw is plastic.